Spring Wire Reduction of Area: T: | Spring Wire  | Spring Manufacturers

Spring Wire Reduction of Area: The difference between the original cross sectional area of a tension test specimen and the area of its smallest cross section. The reduction of area is usually expressed as a percentage of the original cross-sectional area of the specimen. (ASTM A370, ASTM E8)

Please send inquiries to: sales@katyspring.com
Ph.  281-391-1888

Spring Wire Coiling Test  | Spring Wire  | Spring Manufacturers

© Copyright 2000-2012 KATY SPRING & MFG, Inc. All Rights Reserved. Katy Spring is your source for custom formed spring metal component spring manufacturer. We have Compression Springs, Extension Springs, Torsion Springs, flat Springs. Spring manufacturers 

Spring Wire Decarburization: | Spring Wire  | Spring Manufacturers

Spring Wire Decarburization: The loss of carbon from a ferrous alloy as a result of heating in a medium that reacts with carbon. (ASTM E1077)

Please send inquiries to: sales@katyspring.com
Ph.  281-391-1888

Spring Wire Coiling Test  | Spring Wire  | Spring Manufacturers

© Copyright 2000-2012 KATY SPRING & MFG, Inc. All Rights Reserved. Katy Spring is your source for custom formed spring metal component spring manufacturer. We have Compression Springs, Extension Springs, Torsion Springs, flat Springs. Spring manufacturers 

Spring Wire Coiling Test  | Spring Wire  | Spring Manufacturers

Spring Wire Wrap Test: A wire sample is coiled in a closely spaced helix around a mandrel of specified diameter. After wrapping, the sample is examined for cracks. It is considered a failure if any cracks occur in the wire after the first complete turn. (ASTM A370 Annex A4.7)

Please send inquiries to: sales@katyspring.com
Ph.  281-391-1888

Spring Wire Coiling Test  | Spring Wire  | Spring Manufacturers

© Copyright 2000-2012 KATY SPRING & MFG, Inc. All Rights Reserved. Katy Spring is your source for custom formed spring metal component spring manufacturer. We have Compression Springs, Extension Springs, Torsion Springs, flat Springs. Spring manufacturers 

Spring Wire Wrap Test | Spring Wire  | Spring Manufacturers

Spring Wire Wrap Test: A wire sample is coiled in a closely spaced helix around a mandrel of specified diameter. After wrapping, the sample is examined for cracks. It is considered a failure if any cracks occur in the wire after the first complete turn. (ASTM A370 Annex A4.7)

Spring Wire Wrap Test | Spring Wire  | Spring Manufacturers

Spring Wire Roundness Tolerance: The maximum range in wire diameter readings at any given point in the spring wire…usually specified as one half the size tolerance.

Spring manufacturers | Custom spring manufacturers 

Please send inquiries to: sales@katyspring.com
Attn: Mark West Ph.  281-391-1888

Spring Wire Roundness Tolerance |  Spring Manufacturer