Custom Formed Spring & Metal Component Spring Manufacturer:

Visit our corporate website:  www.katyspring.com

Compression Springs Extension Springs Torsion Springs Flat Springs

P: 281-391-1888    |   F: 281-391-0666




Archive for June, 2016

Extension Springs .040 Zin plated music wire extension for marine products

Wednesday, June 22nd, 2016

Extension Springs

Please send inquiries to: sales@katyspring.com
Ph. 281-391-1888

Extension springs are closed-coiled helical springs that extend under a pulling force. Many design considerations must be made with extension springs including; initial tension, stress and deflection of hooks, hook end types.

There are a variety of extension spring end types. Machine loop and hook over center, side loop, full loop over center, no hook, extended hook, hook end with swivel, v-hook over center, double twisted full loop over center, and many more.

Extension Springs .040 Zin plated music wire extension for marine products

Extension Springs .040 Zin plated music wire extension for marine products

Torsion Springs .250 Music Wire for Automotive Industry

Wednesday, June 22nd, 2016

Torsion Spring .250 Music Wire for Automotive Industry.   Contact Katy Spring for custom Torsion Spring

 

Please send inquiries to: sales@katyspring.com
Ph. 281-391-1888

 

 

.250 Music Wire for Automotive

.250 Music Wire for Automotive

Wire form Springs .020 Phosphorous Bronze Wire Form for electronics

Monday, June 20th, 2016
020 Phosphorous Bronze Wire Form for electronics

020 Phosphorous Bronze Wire Form for electronics

Please send inquiries to: sales@katyspring.com
Ph. 281-391-1888

Wire forms come in endless varieties of shapes, sizes, and materials. Several materials used to manufacture wire forms include; high carbon spring steel, phosphor-bronze, brass, beryllium-copper, stainless steel, nickel-silver, high-nickel specialty alloys, and non-tempered wire. Wire forming companies such as Katy Spring can bend wire into fabricated shapes such as clips, pins, springs, rings, hooks, and wire racks to name a few.

 

Compression Spring Manfuacters

Compression Spring Manfuacters

 

 

 

Wire form Springs .020 Phosphorous Bronze Wire Form for electronics

Katy Spring U.S. Tour. First Spring manufacturer to travel

Friday, June 17th, 2016

Katy Spring is pleased to announce the first USA Spring Manufacturer on U.S. Tour.  Call 281-391-1888 for any spring assistance.  For more information about the Katy Spring U.S. Tour, please follow visit our website below:

spring-manufacturers

Spring Manufacturer USA

Spring Manufacturer USA

Extension springs are closed-coiled helical springs

Wednesday, June 15th, 2016
Extension Springs

Extension Springs

Extension Springs

Extension Springs

Extension Springs

Extension springs are closed-coiled helical springs that extend under a pulling force. Many design considerations must be made with extension springs including; initial tension, stress and deflection of hooks, hook end types.

There are a variety of extension spring end types. Machine loop and hook over center, side loop, full loop over center, no hook, extended hook, hook end with swivel, v-hook over center, double twisted full loop over center, and many more.

A hook is open to fit over a projection; a loop is a closed hook. A regular machine hook or loop is made on an automatic looper and is the least expensive and often is the most satisfactory type. Hook stresses can be reduced by reducing hook diameter, using swivel hooks (which can be expensive) and minimizing sharp radius bends.

Initial tension is the force which presses the coils of a closed-wound extension coils together. Initial tension is the force needed to open these coils. Initial tension can be wound into cold-coiled extension springs made from hard-drawn or oil-tempered wires only, such as music wire, 300 series stainless steel, phosphorous-bronze, Monel, Inconel, and their pre-hardened materials.

Spring Manufacturers USA

Tuesday, June 14th, 2016

Katy Spring

compressions-springs6

 

let-katyspring-custom-your-compression-spring-today

compressionsprings8

 

Katy Spring & Mfg., Inc. is an ISO certified, custom spring manufacturer, wire forming and metal components company.

Our emphasis and company philosophy is built on offering outstanding customer service.

We are a full-service manufacturer that can assist with compression springs,extension springs, torsion springs, flat springs and wire forms in an endless variety of shapes, sizes, and material types.

 

Flat Springs Made in the USA

Saturday, June 4th, 2016

Flat Springs Made in the USA

 

Please send inquiries to: sales@katyspring.com
Ph. 281-391-1888

Flat Springs and Custom Flat SPrings

Flat Springs and Custom Flat SPrings

Flat Springs

Flat springs are used to keep forces within restricted space conditions. Several materials are used including flat, high carbon spring steel, phosphor-bronze, beryllium-copper, stainless steel, nickel-silver and high-nickel specialty alloys. Formulas used to design flat springs involve small deflections, never more than 25% of the spring free length. Katy Spring can assist customers with the sometimes complicated designs of these types of springs, also known as beam designs. Flat Springs Made in the USA

Flat Springs Made in the USA

Flat Springs Made in the USA


college term papers essays on boys learn differently than girls scientific essay writing custom writing sites term writing service