Custom Formed Spring & Metal Component Spring Manufacturer:

Visit our corporate website:  www.katyspring.com

Compression Springs Extension Springs Torsion Springs Flat Springs

P: 281-391-1888    |   F: 281-391-0666




Archive for September, 2017

.080 yellow zinc plated torsion spring used in boating industry

Wednesday, September 27th, 2017

.080 yellow zinc plated torsion spring used in boating industry

.080 yellow zinc plated torsion spring used in boating industry

.080 yellow zinc plated torsion spring used in boating industry

Torsion Springs

Torsion springs are helical springs that exert a torque or rotary force and are subject to bending stresses. Torsion springs should always wind up from the free position – never to unwind from the free position. As they wind up, torsion springs reduce in diameter and their length becomes longer. Such springs should be supported over a rod whenever possible. Some spacing should remain between coils to minimize friction which can alter torque and deflection.

.156” Titanium Extension spring used on Boeing Aircraft

Wednesday, September 27th, 2017

.156” Titanium Extension spring used on Boeing Aircraft.

156”-Titanium-Extension-spring-used-on-Boeing-Aircraft.

156”-Titanium-Extension-spring-used-on-Boeing-Aircraft.

Extension Springs

Extension springs are closed-coiled helical springs that extend under a pulling force. Many design considerations must be made with extension springs including; initial tension, stress and deflection of hooks, hook end types.

Flat Spring form that we make for a components distributor

Tuesday, September 26th, 2017

http://katyspring.com/

This is a flat form that we make for a components distributor, made on a Di-Acro former; used for short-run wire forms and flat forms.
It takes a lot of metal forming talent to create set ups like these that repeat quality parts.

Hurricane Harvery Storm

Thursday, September 21st, 2017

The History of Katy Spring

The history of companies is built by many short stories; some boring, some not. We’re going to try and tell the not-so-boring ones (in our humble opinion) about Katy Spring & Mfg., Inc.; a company in Katy Texas that started with a conversation that ended something like this; “Why not.”

These are the stories about Katy Spring, small bits of a bigger story that started in 1999. The stories are still unfolding new chapters every day, thanks to our wonderful customers. It’s written for our customers and future customers so that they can get to know our company, our employees, some historical background and philosophy a little better.

The stories are not told in chronological order. This blog is more of a “Readers Digest” about Katy Spring, written in whatever random order they appear. So without further ado, let’s get started with the next read which is titled; “Harvey”

So many individual stories coming from our area about one of the costliest storms to ever hit Houston, Katy and the entire area as Hurricane Harvey, which made landfall over 100 miles from here, dumped more than 25 inches of rain on a very widespread area of Houston.

The Katy Spring is a very fortunate one.  The plant and offices did not receive any water.  Thankfully, our detention pond was just recently doubled in size as a new building was constructed on the other side of Katy Spring’s 20 acre property just this year.  The water did come up to the foundation of the shop.

Employees could not get to work because of impassible roadways; however Katy Spring resumed full operations after just being closed 2 days.  In comparison, Katy schools did not resume operations for 2 weeks.

Unfortunately, 2 Katy Spring employees were displaced because of flooding and Katy Spring quickly acted to help both families.

Most of Katy took on over 30 inches of rain and was considered one of the higher-impact areas mainly in what’s considered “New Katy” which is close to the 2 reservoirs; Addicks and Barker dam.

Many of homes were affected by the dam’s reservoir backing up because the spillway could not empty water fast enough.  These areas are still cleaning up and will be for quite some time.

Katy Spring experienced 16 inches or rain during the “tax day flood” in 2015.  That amount of rain fell in just 2 days.  The detention was smaller and still allowed the plant and offices to be spared of flooding.

A single-end CNC grinder used for large wire and large OD, short-run grinding.

Monday, September 11th, 2017

A single-end CNC grinder used for large wire and large OD, short-run grinding.
Requires very little set up time and can run unmanned for most of run.
Phone: 281-391-1888 http://www.katyspring.com


science assignment helper college essays for money best academic essays how you write an essay pay to do my paper