Custom Formed Spring & Metal Component Spring Manufacturer:

Visit our corporate website:  www.katyspring.com

Compression Springs Extension Springs Torsion Springs Flat Springs

P: 281-391-1888    |   F: 281-391-0666




Archive for the ‘COMPRESSION SPRING SHAPES’ Category

COMPRESSION SPRING SHAPES

Wednesday, October 23rd, 2013

COMPRESSION SPRING SHAPES.

 

Please send inquiries to: sales@katyspring.com
Ph. 281-391-1888

spring-manufacturers

Compression springs come in different sizes and shapes.   At Katy Spring, we are here to assist your compression spring order process.

 

  • .004 Inches to .625 Inches in Wire Diameter

Compression springs should be stress relieved to remove residual forming stresses produced by the coiling operation. Depending on design and space limitations, compression springs may be categorized according to stress level . Please view the categories below.

There are compression springs which can be compressed solid without permanent set, so that an extra operation for removing set is not needed. These springs are designed with torsional stress levels when compressed solid and they do not exceed about 40 percent of the minimum tensile strength of the material.

Another type of compression spring are those which can be compressed solid without further permanent set after set has initially been removed. These may be pre-set by the spring manufacturer as an added operation. These are springs designed with torsional stress levels when compressed solid that usually do not exceed 60 percent of the minimum tensile strength of the material.

Lastly there are springs which cannot be compressed solid without some further permanent set taking place because set cannot be completely removed in advance. These springs involve torsional stress levels which exceed 60 percent of the minimum, tensile strength of the material.

Compression spring used in oilfield made out of .118 music wire

Coil spring used in oilfield made out of .118 music wire

Conical spring made from .085 stainless steel used in gas industry
Conical spring made from .085 stainless steel used in gas industry
Compression spring made out of .250 music wire. Used in oil and gas industry
Coil spring made out of .250 music wire.
Used in oil and gas industry

Coil spring made out of .014 stainless steel 302
used in the military

Coil spring made out of .156 music wire used in medical industry

Coil spring made out of .156 music wire used in medical industry

 

Please send inquiries to: sales@katyspring.com
Ph. 281-391-1888


ghost writing service pay to write my term paper online essay writers paying for essay buying online papers