Torsion springs exert a torque when they are twisted or deflected. The spring torque and the length of the legs together create a force. Torsion springs can be made out of round, rectangular or shaped wire.
A simple torsion spring has straight, but any bends or shapes can be formed. Double body torsion springs can
be used when twice the force is required or when you need an even distribution of torque.

For more information on Torsion springs , contact Katy Spring today at 281-391-1888

Double Body Torsion Spring

.080 Brass Double Body Torsion Spring

Torsion Spring

Torsion Spring

Common Spring materials:

TTorMaterial Max. recommended % tensile in bending
Music Wire 80%
Chrome Silicon 80%
Chrome Vanadium 80%
302 Stainless Steel 60%
316 Stainless Steel 60%
17-7 Stainless 75%

Spring Terms
ID = Inside Diameter
D = Mean Diameter
Dm = Minimum Diameter under deflection
Δ = Deflection angle
d = wire diameter
L = leg length
Na= number of active coils
Nt = number of total coils
R= Spring Rate
P = applied force
M = Moment or Torque
Sb = bending stress
c = spring index
?L = deflection
UTS= Ultimate Tensile Strength

Design Tips
• Torsion springs should be deflected in the direction that closes the coils
• Inside diameters reduce to Dm when deflected. Mandrel size should be larger than Dm
• Na takes into account the material in the legs. If the force is supplied close to the body of the spring Nt is a good approximation

Pin It on Pinterest

Katy Spring & Mfg. Inc.